Sharp MX-3050N User Manual page 48

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
3
Main Code Registration
Main Code
To return to the billing code selection window
Tap .
4 (4)
Main Code Registration
Main Code
Main Code Name
(5)
Tap the box of [Main Code Name], then type in the main code name.
5
Specify the code name using up to 32 double- or single-byte characters.
6
Main Code Registration
Main Code
Main Code Name
Available to
Public to All
Specify target public address
The public destination of a billing code is not displayed if user authentication is not performed. The mode is automatically
set to [Public to All].
Add New
Main Code Name
Cancel and Return
End Registration
Register
Next Billing Code.
Cancel and Return
End Registration
Register
Next Billing Code.
Tap [Add New] on the action panel.
CA
Tap the box of [Main Code], then type
in the main code.
Specify the code using up to 32 single-byte characters.
CA
If necessary, select the share range of
billing code.
Public to All: Registers the billing code as a public code for
all users who use the machine.
Specify target public address: Limits the share range of
billing code to be registered only to the specified group. Up
CA
to eight groups can be specified as a public destination.
For details on how to specify a public destination, refer to
"Shared range of billing code (page
1-45
1-44)".