Interface Settings; Hexadecimal Dump Mode - Sharp MX-3050N User Manual

Digital full colour multifunctional system

Hide thumbs Also See for MX-3050N:

Table of Contents

SYSTEM SETTINGS►SYSTEM SETTINGS

Interface Settings

Settings related to the printer function can be configured.

These settings are used to control and monitor data transmitted to the USB port or network port of the machine.

This function is used to print the print data from a computer in hexadecimal format together with the corresponding

ASCII text. This mode allows you to check whether or not print data from the PC is being transmitted to the printer

Example of a hexadecimal dump

The I/O timeout can be set to any number of seconds from 1 to 999.

The I/O timeout function temporarily breaks the connection if the set duration of time elapses without any data being

received by the port. After the connection is broken, the port is set to auto selection or the next print job is begun.

Enable Network Port

Enables printing from the network port.

Network Port Emulation Switching

This setting is used to select the emulated printer language when the machine is connected by a network port.

The following settings can be configured.

• PostScript

Unless printer errors occur frequently, it is recommended that you use the factory default setting "Auto".

Port Switching Method

Selects when port switching takes place.

Switch at End of Job

The port changes to auto selection when printing ends.

Switch after I/O Timeout

When the time set in "I/O Timeout" elapses, the port changes to Auto Selection.

Table of Contents