Sharp MX-3050N User Manual page 180

COPIER►BASIC PROCEDURE FOR MAKING COPIES
Copying in two colours
The original is copied in two colours by changing a specific colour to another colour.
Tap the [Colour Mode] key.
1
Tap the [2 Colour] key.
2
3
Colour Mode
Auto
Colour
CA
Preview
4
2 Colour
Selected colour
Except Black
Reddish Colour
CA
Preview
Specify the colour to change the extracted colour to.
5
After the settings are completed, tap the
displayed at the side of [2 Colour] key on the colour mode screen.
After you have checked it, tap
Check that the specified colour mode is selected.
(2)
Full
B/W 2 Colour
(3) Reddish Colour
Change
Copies
B/W
Start
Red
Specified Colour
Copies
B/W
Start
.
Tap the [Change] key.
Colour
Start
Tap the key of the colour to be
extracted to specify the extract colour.
• [Except Black]:
Extracts black parts in an original, and changes non-black
parts to the specified colour.
• [Reddish Colour]:
Extracts reddish parts in an original, and changes them to
the specified colour.
Colour
Start
key on the [2 Colour] screen, and check that the changed setting is
2-21