Sharp MX-3050N User Manual page 475

FACSIMILE►OTHERS FUNCTION
3
Address Book Address Fax Number
Exposure
Auto
Resolution
Super Fine
Original
Job Build
Slow Scan Mode
Mixed Size Orig.
Original Count
Others
reception memory
To cancel the job build setting
Tap the [Job Build] key to uncheck it.
Change settings as needed.
4
Tap the [Start] key to scan the first original page.
5
Place the next set of originals and tap the [Start] key.
6
Repeat this step until all originals have been scanned.
• If needed, tap [Change Setting] before tapping the [Start] key, and change the original scan settings and send settings
for the next original. The setting changes will be applied to the next job.
• If you tap the [Preview] key, you cannot scan additional pages.
To cancel scanning:
Tap the [CA] key. All settings including scanned data will be cleared.
Tap the [Read-End] key.
7
If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
To change the time until transmission takes place automatically:
Select "Settings (administrator)" - [System Settings] → [Image Send Settings] → [Common Settings]
→ [Condition Settings] → [Job Auto Start Time During Scanning].
Sending History
Call Search Number
Direct TX
Verification Stamp
Call Program
Call Registered settings
Send Same Image
as Fax Address
Preview
Scan Size Send Size
100%
Auto Auto
Start
A4 A4
Speaker
100%
4-80
Tap the [Job Build] key.
A checkmark appears on the icon.
CA