Sharp MX-3050N User Manual page 7

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
(15) (16) (17)
(9) Saddle Stitch Finisher (large stacker)
This staples and folds paper. A punch module can also
be installed to punch holes in output paper. You can also
perform stapling manually.
► SADDLE STITCH FINISHER (LARGE STACKER) (page
1-121)
*1
(10) Paper pass unit
Relay between the machine and the finisher, finisher
(large stacker), saddle stitch finisher or saddle stitch
finisher (large stacker).
*2
(11) Motion sensor
This sensor detects the presence of a person that
approaches the machine, and automatically wakes the
machine from sleep mode (Motion Sensor Mode Only).
(12) Bypass tray
Use this tray to feed paper manually.
When loading paper larger than A4R or 8-1/2" x 11"R,
pull out the extension guide.
► LOADING PAPER INTO THE BYPASS TRAY (page 1-71)
(13) Tray 5 (when a large capacity tray is installed)
Store paper in this tray.
► LOADING PAPER IN THE LARGE-CAPACITY TRAY
(when a large capacity tray is installed) (page 1-69)
(14) Tray 1
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page 1-65)
*1
(15) Finisher
This staples paper. A punch module can also be installed
to punch holes in output paper.
► FINISHER (page 1-110)
(16) Saddle Stitch Finisher
This staples and folds paper. A punch module can also
be installed to punch holes in output paper.
► SADDLE STITCH FINISHER (page 1-117)
*1 Peripheral device.
Equipped standard or not available in some countries and regions. Not available on some models. Contact your
dealer or nearest authorised service representative.
*2 Can only be used on the MX-3060N/MX-3070N/MX-3560N/MX-3570N/MX-4060N/MX-4070N.
(9)
(18)
*1
*1
*1
(10) (11) (12)
(19) (20) (21)
(17) Finisher (large stacker)
This staples paper. A punch module can also be installed
to punch holes in output paper. You can also perform
stapling manually.
► FINISHER (LARGE STACKER) (page 1-113)
(18) Punch module
This is used to punch holes in output. Requires an inner
finisher, finisher, finisher (large stacker), saddle stitch
finisher or saddle stitch finisher (large stacker).
(19) Front cover
Open this cover to switch the main power switch to "On"
or "Off" to replace a toner cartridge.
► TURNING ON THE POWER (page 1-10)
► REPLACEMENT OF TONER CARTRIDGE (page 1-149)
(20) Tray 3 (when a stand/2x550/3x550 sheet paper
drawer is installed)
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page 1-65)
(21) Tray 4 (when a stand/3x550 sheet paper drawer is installed)
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page 1-65)
(22) Tray 2 (when a stand/550/2x550/3x550/550&2100
sheet paper drawer is installed)
Store paper in this tray.
► TRAY 1 - 4 (when a stand/550/2x550/3x550/
550&2100 sheet paper drawer is installed) (page 1-65)
(23) Tray 4 (when a stand/550&2100 sheet paper drawer is installed)
Store paper in this tray.
► TRAY 3 - 4 (when a stand/550&2100 sheet paper
drawer is installed) (page 1-67)
(24) Tray 3 (when a stand/550&2100 sheet paper drawer is installed)
Store paper in this tray.
► TRAY 3 - 4 (when a stand/550&2100 sheet paper
drawer is installed) (page 1-67)
1-4
(13) (14)
*1
*1
*1
*1
(22)
(23)
(24)
*1
*1
*1