Changing The Settings - Sharp MX-3050N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE
3
Erase Specified Range
To delete the image outside the selected range, tap [Reverse Erase Range] on the action panel.
4
Erase Specified Range
As necessary, repeat the steps to specify the erase range and the pages to
5
which it is applied.
6
Erase Specified Range

Changing the settings

Tapping the tab on the left of the screen allows you to change the colour mode and other settings.
You cannot tap the keys for functions whose settings cannot be changed.
Copies
Colour Mode
Full Colour
Original
Auto A4
Paper Select
Auto
2-Sided Copy
1-Sided→1-Sided
Copy Ratio
100%
Exposure
Auto
Sort/Group
Auto
Others
Exit
Start Point
X 53
Y 31
Height 31
97
Width
Clear OK
Specify Range2
Specify Range3
Specify Range4
Apply This Erase
Position to All Pages.
Apply This Erase
Start Point
Position to This Page.
Reverse Erase Range
Height
Width
Specify Range2
Specify Range3
Specify Range4
Exit
Erase Range1
Specify Range2
Specify Range3
Specify Range4
Send as well as print
Address Book
Quick File
Subject
Store Data Temporarily
File
File Name
Store Data in Folder
Scan Original Again
Colour Mode
Without change Settings
Resolution
File Format
Original
CA
1 / 6
Exposure
B/W Colour
Start Start
1-22
Follow the on-screen instructions to
specify the erase range.
Specify the erase range and then tap the [OK] key.
On the action panel, select [Apply This
Erase Position to All Pages.] or [Apply
This Erase Position to This Page.].
Tap the [Exit] key.
Address Touch to Input Address
Specified by System Settings
Options
Auto/Mono2
200x200dpi
PDF
Auto
Others
Sending History
Call Search Number
Check Send/Receive
Status
Send Same Image
as Fax Address
Quick File
Store Data Temporarily
File
Store Data in Folder
CA
Start