Eco; Eco Functions Of The Machine - Sharp MX-3050N User Manual

BEFORE USING THE MACHINE►BEFORE USING THE MACHINE

Eco

ECO FUNCTIONS OF THE MACHINE

These functions help save power consumption by managing operations of sections prone to high power consumption.
The machine provides two power-saving modes.
Function
AUTO POWER SHUT-OFF
MODE
PREHEAT MODE
In addition to these two modes, using the following functions in conjunction helps reduce even more power
consumption.
Function
ECO RECOMMENDATION
FUNCTION DISPLAY
AS SOON AS THE REMOTE JOB
IS FINISHED, ENTER AUTO
POWER SHUT OFF MODE
ECO SCAN
POWER ON/OFF SCHEDULE
SETTING
SPECIFIC DATE OPERATION
SETTINGS
Toner Save Mode
MOTION SENSOR
(MX-3060N/MX-3070N/MX-3560N
/MX-3570N/MX-4060N/MX-4070N
only)
Sleep Mode Power Level
Mode Settings
The eco function settings are set in a batch. "Custom" and "Eco" are available.
Setting values applied by each mode is as follows.
Function
Eco Scan
Auto Power Shut-Off Timer
As soon as the remote job is finished,
enter Auto power shut off mode.
If no operations take place, this mode will turn off the power to the operation
panel and the fusing unit, and makes the machine wait in the lowest power
consumption state.
Although the power-saving rate is higher, the wakeup time is longer.
This mode lowers the temperature of the fusing unit and makes the machine
wait in low power consumption state.
Compared to Auto Power Shut-Off Timer, the power-saving rate is lower, but
the wakeup time is shorter.
Shows recommended copy/print settings for copy, document filing reprint,
and direct print.
The machine returns from Auto Power Shut-Off and enters Auto Power
Shut-Off mode as soon as printing is completed.
The machine is operated with the fusing unit turned off for non-printing
operations (that do not use the fusing unit) such as fax and image
transmission.
Use this function to set the times for turning the power on and off to reduce
power consumption.
When you must have the machine perform exceptionally many print jobs or
other special operation on a certain day, you can specify the day as a
"Specific Date" and define an energy saving pattern only for that day.
This mode is used to reduce toner consumption.
This sensor detects the presence of a person that approaches the machine,
and automatically wakes the machine from sleep mode (Motion Sensor
Mode Only).
Select whether priority is given to power saving or wakeup time.
Custom
On (Sending Modes Only)
Change transition time by time of day.: Auto
Off
1-26
Description
Description
On (All Modes Except Copy)
Fix transition time.: 1min.
On
Page
1-27
1-28
Page
1-28
1-29
1-29
1-30
1-30
7-159
1-31
7-156
Eco