Repeater Mode; Client Mode - TP-Link TL-WR810N User Manual

1. Connect the LAN port of TL-WR810N to the LAN Port on the DSL/Cable Modem.
2. Plug the power plug of TL-WR810N in electrical wall socket. The Router will start to work
automatically.
3. Connect your device to the router wirelessly. The Wi-Fi network name and password are on
the router's label.

2.3.3 Repeater Mode

Repeat signal from an existing wireless network. This mode is suitable to extend wireless
coverage, reaching devices that were previously too far from your primary router to maintain a
stable wireless connection. The repeated signal will display the same network name and
password as your existing wireless network.
Figure 2-3 Hardware Installation of the TL-WR810N in Repeater Mode
1. Plug the router into an electrical outlet within the signal range of your main AP.
2. Connect your device to the router wirelessly. The Wi-Fi network name and password are on
the router's label.

Note:
It is recommended that you connect a PC/notebook to the LAN port of the Router with an Ethernet
cable, and then login the Router from the PC/notebook to set the Router in Repeater mode.

2.3.4 Client Mode

In this mode, this device can be connected to another device via Ethernet cable and act as an
adapter to grant your wired devices access to a wireless network, especially for a Smart TV,
Media Player, or Game console only with an Ethernet port.
TL-WR810N 300Mbps Wireless N Mini Router
- 7 -