Host - TP-Link TL-WR810N User Manual

In Host field, select Host_1.

In Target field, select Target_1.

In Schedule field, select Schedule_1.

In Action field, select Allow.

In Status field, select Enabled.

Click Save to complete the settings.

Then you will go back to the Access Restriction Rule Management page and see the following list.

8.13.2 Host

Choose menu "Access Control → Host", you can view and set a Host list in the screen as
shown in Figure 8-58. The host list is necessary for the Access Restriction Rule.

Host Description - Here displays the description of the host and this description is unique.

Information - Here displays the information about the host. It can be IP or MAC.

Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New... button.
2. In the Mode field, select IP Address or MAC Address.

If you select IP Address, the screen shown is Figure 8-59.
1) In Host Description field, create a unique description for the host (e.g. Host_1).
2) In LAN IP Address field, enter the IP address.

If you select MAC Address, the screen shown is Figure 8-60.
1) In Host Description field, create a unique description for the host (e.g. Host_1).
2) In MAC Address field, enter the MAC address.
TL-WR810N
Figure 8-57 Rule Settings
Figure 8-58 Host Settings
- 244 -
300Mbps Wireless N Mini Router