TP-Link TL-WR810N User Manual page 215

Method Three: Enter the PIN from my AP
Step 1: Get the Current PIN code of the AP in Figure 8-3 (each AP has its unique PIN code. Here
takes the PIN code 12345670 of this AP for example).
Step 2: For the configuration of the wireless adapter, please choose "Enter the PIN of my
access point or wireless router" in the configuration utility of the WPS as below, and
enter the PIN code of the AP into the field after "Access Point PIN". Then click Connect.

Note:
The default PIN code of the AP can be found in its label or the WPS configuration screen as
Figure 8-3.
You will see the Connect successfully screen when the new device has successfully connected
to the network.

Note:
1) The WPS LED on the AP will light green for five minutes if the device has been successfully
added to the network.
2) The WPS function cannot be configured if the Wireless function of the AP is disabled. Please
make sure the Wireless function is enabled before configuring the WPS.
Figure 8-5 Add A New Device
The WPS Configuration Screen of Wireless Adapter
TL-WR810N 300Mbps Wireless N Mini Router
- 199 -