Wireless Statistics - TP-Link TL-WR810N User Manual

specify the value between 1-255 Beacon Intervals. The default value is 1, which indicates
the DTIM Interval is the same as Beacon Interval.

Enable WMM - WMM function can guarantee the packets with high-priority messages being
transmitted preferentially. It is strongly recommended enabled.

Enable Short GI - This function is recommended for it will increase the data capacity by
reducing the guard interval time

Enable AP Isolation - This function isolate all connected wireless stations so that wireless
stations cannot access each other through WLAN. This function will be disabled if
WDS/Bridge is enabled.

Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the
provided default values; otherwise it may result in lower wireless network performance.

4.7.5 Wireless Statistics

Choose menu "Wireless → Wireless Statistics", and then you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.

MAC Address - The connected wireless station's MAC address

Current Status - The connected wireless station's running status, one of
STA-ASSOC / STA-JOINED / WPA / WPA-PSK / WPA2 / WPA2-PSK / AP-UP / AP-DOWN /
Disconnected

Received Packets - Packets received by the station

Sent Packets - Packets sent by the station.

Configure - The button is used for loading the item to the Wireless MAC Filtering list.

Allow - If the Wireless MAC Filtering function enable, allow the station to access.

Deny - If the Wireless MAC Filtering function enable, deny the station to access.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
TL-WR810N
.
Figure 4-23 Wireless Statistics
- 54 -
300Mbps Wireless N Mini Router
STA-AUTH /