Wireless Mac Filtering - TP-Link TL-WR810N User Manual

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, and null
key is not permitted) or 16 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.

7.6.3 Wireless MAC Filtering

Choose menu "Wireless → Wireless MAC Filtering", and then you can control the wireless
access by configuring the Wireless MAC Filtering function, as shown in Figure 7-9.
To filter wireless users by MAC Address, click Enable. The default setting is Disabled.

MAC Address - The wireless station's MAC address that you want to access.

Status - The status of this entry, either Enabled or Disabled.

Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 7-10:
Figure 7-10 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX
00-0A-EB-B0-00-0B.
2. Give a simple description for the wireless station in the Description field. For example:
Wireless station A.
TL-WR810N
Figure 7-9 Wireless MAC Filtering
(X is any
- 172 -
300Mbps Wireless N Mini Router
hexadecimal digit). For example: