Wireless Security - TP-Link TL-WR810N User Manual

300mbps wireless n mini router
Hide thumbs Also See for TL-WR810N:
Table of Contents

Advertisement

8.7.2 Wireless Security

Disable Security - The wireless security function can be enabled or disabled. If disabled, the
wireless stations will be able to connect the Router without encryption. But it's strongly
recommended to choose one of the following modes to enable security.
WPA-PSK/WPA2-Personal - It's the WPA/WPA2 authentication type based on pre-shared
passphrase.
Version - you can choose the version of the WPA-PSK security on the drop-down list. The
default setting is Automatic, which can select WPA-PSK (Pre-shared key of WPA) or
WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's
capability and request.
Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select
either Automatic, or TKIP or AES as Encryption.
Wireless Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should be between
8 and 63 characters.
Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.
TL-WR810N
Figure 8-19 Wireless Security
- 214 -
300Mbps Wireless N Mini Router

Advertisement

Table of Contents
loading

Table of Contents