Lan - TP-Link TL-WR810N User Manual

Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.
 WAN MAC Address - This field displays the current MAC address of the WAN port. If your
ISP requires you to register the MAC address, please enter the correct MAC address into
this field in XX-XX-XX-XX-XX-XX format (X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is managing

the Router. If the MAC address is required, you can click the Clone MAC Address To
button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save button to save your settings.

Note:
1. Only the PC on your LAN can use the MAC Address Clone function.
2. If you change WAN MAC Address when the WAN connection is PPPoE, it will not take effect
until the connection is re-established.

8.6.3 LAN

Choose menu "Network → LAN", and then you can configure the IP parameters of the LAN on
the screen as below.
MAC Address - The physical address of the LAN ports, as seen from the LAN. The value

can't be changed.
IP Address - Enter the IP address of your Router in dotted-decimal notation (factory default:

192.168.0.254).
Subnet Mask - An address code that determines the size of the network. Normally use

255.255.255.0 as the subnet mask.
 IGMP Proxy - The Internet Group Management Protocol (IGMP) feature allows your devices
in LAN can watch TV.

Note:
1. If you change the IP Address of LAN, you must use the new IP Address to login to the Router.
TL-WR810N
Figure 8-16 LAN
- 211 -
300Mbps Wireless N Mini Router