Method One:
Step 1:
Keep the WPS Status as Enabled and click the Add Device button in Figure 8-3, then
the following screen will appear.
Choose "Press the button of the new device in two minutes" and click Connect.
Step 2:
For the configuration of the wireless adapter, please choose "Push the button on my
Step 3:
access point or wireless router" in the configuration utility of the WPS as below, and
click Connect.
Step 4:
Wait for a while until the next screen appears. Click OK to complete the WPS
configuration.
Figure 8-4 Add A New Device
The WPS Configuration Screen of Wireless Adapter
TL-WR810N
300Mbps Wireless N Mini Router
- 197 -