TP-Link TL-WR810N User Manual page 105

When you want to add or modify an IP & MAC Binding entry, you can click the Add New button
or Modify button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry.
To add IP & MAC Binding entries:
1. Click the Add New.. button.
2. Enter the MAC Address and IP Address.
3. Select the Bind checkbox.
4. Click the Save button to save it.
To modify or delete an existing entry:
1. Find the desired entry in the table.
2. Click Modify or Delete as desired on the Modify column.
To find an existing entry:
1. Click the Find button (shown in Figure 4-77).
2. Enter the MAC Address or IP Address.
3. Enter the Find button in the next page (shown in Figure 4-79).
Click the Enable All button to make all entries enabled.
Click the Delete All button to delete all entries.
Figure 4-78 IP & MAC Binding Setting (Add & Modify)
Figure 4-79 Find IP & MAC Binding Entry
TL-WR810N 300Mbps Wireless N Mini Router
- 89 -