Wireless; Wireless Settings - TP-Link TL-WR810N User Manual

3. If the new IP address you set is not in the same subnet, the IP Address pool in the DHCP
server will not take effect, until they are re-configured.
4. This device will reboot automatically after you click the Save button.
Click the Save button to save your settings.

Note:
When you choose the Smart IP (DHCP) mode, the DHCP Server function will be disabled.

6.6 Wireless

Figure 6-6 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 6-6): Wireless Settings,
Wireless Security, Wireless MAC Filtering, Wireless Advanced, Wireless Statistics and
Throughput Monitor. Click it, and you will be able to configure the corresponding function.

6.6.1 Wireless Settings

Choose menu "Wireless → Wireless Settings", and then you can configure the basic settings
for the wireless network on this page.
 Wireless Name of Root AP - The SSID of AP that you want to access.
MAC Address of Root AP - The MAC address of AP that you want to access.

 Mode - Select the desired mode. The default setting is 11bgn mixed.

11bg mixed - Select if you are using both 802.11b and 802.11g wireless clients.

11bgn mixed - Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.
TL-WR810N
Figure 6-7 Wireless Settings - Repeater
- 139 -
300Mbps Wireless N Mini Router