TP-Link TL-WR810N User Manual page 158


Wireless Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should be between
8 and 63 characters.

Group Key Update Period - Specify the group key update interval in seconds. The value
can be either 0 or at least 30. Enter 0 to disable the update.

Note:
If you check the WPA/WPA2-Personal
a notice in red as shown.

WPA /WPA2-Enterprise - It's based on Radius Server.

Version - you can choose the version of the WPA security from the pull-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.

Encryption - You can select Automatic, TKIP or AES.

Radius Server IP - Enter the IP address of the Radius server.

Radius Port - Enter the port that Radius server used.

Radius Password - Enter the password for the Radius server.

Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.

WEP - It is based on the IEEE 802.11 standard.

Type - you can choose the type for the WEP security on the pull-down list. The default
setting is Automatic, which can select Shared Key or Open System authentication type
automatically based on the wireless station's capability and request.

WEP Key Format - Hexadecimal and ASCII formats are provided here
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length. ASCII format stands for any combination of keyboard characters in the specified
length.

WEP Key (Password) - Select which of the four keys will be used and enter the matching
WEP key that you create. Make sure these values are identical on all wireless stations in
your network.
TL-WR810N 300Mbps Wireless N Mini Router
radio button and choose TKIP encryption, you will find
- 142 -
.
Hexadecimal