Ping Watch Dog; Firmware Upgrade - TP-Link TL-WR810N User Manual

5.10.2 Ping Watch Dog

Choose menu "System Tools → Ping Watch Dog", and then you can see the following screen.
The Ping Watch Dog is dedicated for continuous monitoring of the particular connection to
remote host using the Ping tool. It makes this device continuously ping a user defined IP address
(it can be the internet gateway for example). If it is unable to ping under the user defined
constraints, this device will automatically reboot.

Enable - Turn on/off Ping Watch Dog.

IP Address - The IP address of the target host where the Ping Watch Dog Utility is sending
ping packets.

Interval - Time interval between two ping packets which are sent out continuously.

Delay - Time delay before first ping packet is sent out when this device is restarted.

Fail Count - Upper limit of the ping packet this device can drop continuously. If this value is
overrun, this device will restart automatically.
Be sure to click the Save button to make your settings in operation.

5.10.3 Firmware Upgrade

Choose menu "System Tools → Firmware Upgrade", and then you can update the latest
version of firmware for the Router on the following screen.
TL-WR810N
Figure 5-35 Ping Watch Dog Utility
Figure 5-36 Firmware Upgrade
- 130 -
300Mbps Wireless N Mini Router