TP-Link TL-WR810N User Manual page 166

address for a PC on the LAN, that PC will always receive the same IP address each time when it
accesses the DHCP server. Reserved IP addresses should be assigned to the servers that
require permanent IP settings.
MAC Address - The MAC address of the PC for which you want to reserve an IP address.

 Reserved IP Address - The IP address reserved for the PC by the Router.
Status - The status of this entry either Enabled or Disabled.

Modify - To modify or delete an existing entry.

To Reserve an IP address:
1. Click the Add New... button. Then Figure 6-19 will pop-up.
2. Enter the MAC address (in XX-XX-XX-XX-XX-XX format) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
To modify an existing entry:
1. Click the Modify in the entry you want to modify.
2. Modify the information.
3. Click the Save button.
Click the Delete in the entry you want to delete to delete an existing entry.
Click the Enable/Disable All button to make all entries enabled/disabled.
Click the Delete All button to delete all entries.
Figure 6-19 Address Reservation
Figure 6-20 Add or Modify an Address Reservation Entry
TL-WR810N 300Mbps Wireless N Mini Router
- 150 -