TP-Link TL-WR810N User Manual page 219

User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive.
Confirm Password - Enter again the Password provided by your ISP to ensure the

password you entered is correct.
Secondary Connection - It's available only for PPPoE Connection. If your ISP provides

an extra Connection type such as Dynamic/Static IP to connect to a local area network,
then you can check the radio button of Dynamic/Static IP to activate this secondary
connection.

Disabled - The Secondary Connection is disabled by default, so there is PPPoE
connection only. This is recommended.

Dynamic IP - You can check this radio button to use Dynamic IP as the secondary
connection to connect to the local area network provided by ISP.

Static IP - You can check this radio button to use Static IP as the secondary
connection to connect to the local area network provided by ISP.
Connect on Demand - In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (Max Idle Time) and be re-established
when you attempt to access the Internet again. If you want your Internet connection
keeps active all the time, please enter "0" in the Max Idle Time field. Otherwise, enter
the number of minutes you want to have elapsed before your Internet access
disconnects.
 Connect Automatically - The connection can be re-established automatically when it
was down.
TL-WR810N
WAN - PPPoE/Russia PPPoE
Figure 8-10
- 203 -
300Mbps Wireless N Mini Router