Rule - TP-Link TL-WR810N User Manual

There are four submenus under the Access Restriction menu as shown in Figure 8-54: Rule,
Host, Target and Schedule. Click any of them, and you will be able to configure the
corresponding function.

8.13.1 Rule

Choose menu "Access Control → Rule", you can view and set Access Restriction rules in the
screen as shown in Figure 8-55.

Enable Internet Access Restriction - Select the check box to enable the Internet Access
Restriction function, so the Default Filter Policy can take effect.

Rule Name - Here displays the name of the rule and this name is unique.

Host - Here displays the host selected in the corresponding rule.

Target - Here displays the target selected in the corresponding rule.

Schedule - Here displays the schedule selected in the corresponding rule.

Status - This field displays the status of the rule. Enabled means the rule will take effect,
Disabled means the rule will not take effect.

Modify - Here you can edit or delete an existing rule.
To add a new rule, please follow the steps below.
1. Click the Add New... button and the next screen will pop-up as shown in Figure 8-56.
2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
Select a host from the Host drop-down list or choose "Click Here To Add New Host List".
3.
Select a target from the Target drop-sown list or choose "Click Here To Add New Target
4.
List".
Select a schedule from the Schedule drop-down list or choose "Click Here To Add New
5.
Schedule".
TL-WR810N
Figure 8-55 Access Control Rule Management
- 242 -
300Mbps Wireless N Mini Router