Dhcp; Dhcp Settings - TP-Link TL-WR810N User Manual

You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.

Note:
This page will be refreshed automatically every 5 seconds.

8.8 DHCP

Figure 8-25 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 8-25): DHCP Settings,
DHCP Client List and Address Reservation. Click any of them, and you will be able to configure
the corresponding function.

8.8.1 DHCP Settings

Choose menu "DHCP → DHCP Settings", and then you can configure the DHCP Server on the
page as shown in Figure 8-26. The Router is set up by default as a DHCP (Dynamic Host
Configuration Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router in the LAN.
 DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must configure the computer
manually.
TL-WR810N
Figure 8-26 DHCP Settings
- 220 -
300Mbps Wireless N Mini Router