Wireless Mac Filtering - TP-Link TL-WR810N User Manual

152-bit - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, and null
key is not permitted) or 16 ASCII characters.

Note:
If you do not set the key, the wireless security function is still disabled even if you have selected
Shared Key as Authentication Type.
Be sure to click the Save button to save your settings on this page.

4.7.3 Wireless MAC Filtering

Choose menu "Wireless → Wireless MAC Filtering", and then you can control the wireless
access by configuring the Wireless MAC Filtering function as shown.
To filter wireless users by MAC Address, click Enable. The default setting is Disable.

MAC Address - The wireless station's MAC address that you want to access.

Status - The status of this entry, either Enabled or Disable.

Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the Add New... button. The "Add or Modify
Wireless MAC Address Filtering entry" page will appear, shown in Figure 4-21:
Figure 4-21 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC
Address is XX-XX-XX-XX-XX-XX
00-0A-EB-B0-00-0B.
TL-WR810N
Figure 4-20 Wireless MAC Filtering
(X is
- 51 -
300Mbps Wireless N Mini Router
any hexadecimal digit). For example: