Reboot; Password - TP-Link TL-WR810N User Manual

7.9.6 Reboot

Choose menu "System Tools → Reboot", and then you can click the Reboot button to reboot
the Router via the next screen.
Some settings of the Router will take effect only after rebooting, which include:

Change the LAN IP Address (system will reboot automatically).

Change the DHCP Settings.

Change the Wireless configurations.

Change the Web Management Port.

Upgrade the firmware of the Router (system will reboot automatically).

Restore the Router's settings to factory defaults (system will reboot automatically).

Update the configuration with the file (system will reboot automatically.

7.9.7 Password

Choose menu "System Tools → Password", and then you can change the factory default user
name and password of the Router in the next screen as shown in Figure 7-37.
It is strongly recommended that you should change the factory default user name and password
of the Router, because all users who try to access the Router's Web-based utility or Quick Setup
will be prompted for the Router's default user name and password.

Note:
The new user name and password must not exceed 14 characters in length and not include any
spaces. Enter the new Password twice to confirm.
TL-WR810N
Figure 7-36 Reboot the Router
Figure 7-37 Password
- 191 -
300Mbps Wireless N Mini Router