Advanced Routing; Static Routing List - TP-Link TL-WR810N User Manual

1. Click Add New... button shown in Figure 4-65 to enter the Advanced Schedule Settings
page.
2. In Schedule Description field, create a unique description for the schedule (e.g.
Schedule_1).
3. In Day field, check the Select Days radio button and then select Sat and Sun.
4. In Time field, enter 1800 in Start Time field and 2000 in Stop Time field.
5. Click Save to complete the settings.
Then you will go back to the Schedule Settings page and see the following list.

4.14 Advanced Routing

Figure 4-68 The Advanced Routing Menu
There are two submenus under the Network menu (shown in Figure 4-68): Static Routing List
and System Routing Table. Click any of them, and you will be able to configure the
corresponding function.

4.14.1 Static Routing List

Choose menu "Static Routing", and you can configure the static route in the next screen, shown
in Figure 4-69. A static route is a pre-determined path that network information must travel to
reach a specific host or network.
To add static routing entries, follow the steps below.
1. Click Add New... shown in Figure 4-69, you will see the following screen Figure 4-70.
TL-WR810N
Figure 4-67 Schedule Settings
Figure 4-69 Static Routing
- 84 -
300Mbps Wireless N Mini Router