TP-Link TL-WR810N User Manual page 221

 ISP Specified IP Address - If your ISP does not automatically assign IP addresses to
the Router during login, please click "Use IP address specified by ISP" check box and
enter the IP address provided by your ISP in dotted-decimal notation.
Detect Online Interval - The Router will detect Access Concentrator online at every

interval. The default value is "0". You can input the value between "0" and "120". The
value "0" means no detect.
Primary DNS/Secondary DNS - If your ISP does not automatically assign DNS

addresses to the Router during login, please click "Use the following DNS servers"
check box and enter the IP address in dotted-decimal notation of your ISP's primary
DNS server. If a secondary DNS server address is available, enter it as well.
Click the Save button to save your settings.
4. If your ISP provides BigPond Cable connection, please select BigPond Cable option. Then
you should enter the following parameters (Figure 8-12):
 User Name/Password - Enter the User Name and Password provided by your ISP.
These fields are case-sensitive.
Auth Server - Enter the authenticating server IP address or host name.

Auth Domain - Type in the domain suffix server name based on your location,

MTU Size - The default MTU size is "1480" bytes, which is usually fine. It is not

recommended that you change the default MTU Size unless required by your ISP.
Connect on Demand - In this mode, the Internet connection can be terminated

automatically after a specified inactivity period (Max Idle Time) and be re-established
TL-WR810N
WAN - BigPond Cable
Figure 8-12
- 205 -
300Mbps Wireless N Mini Router