TP-Link TL-WR810N User Manual page 122


Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
Step 2: Keep the WPS Status as Enabled and click the Add Device button in Figure 5-3.
Step 3: Choose "Enter the new device's PIN" and enter the PIN code （take 16952898 for
example） of the wireless adapter in the field after PIN as shown in the figure below. Then
click Connect.
Method Three: Enter the PIN from my AP
Step 1: Get the Current PIN code of the AP in Figure 5-3 (each AP has its unique PIN code. Here
takes the PIN code 12345670 of this AP for example).
Step 2: For the configuration of the wireless adapter, please choose "Enter the PIN of my
access point or wireless router" in the configuration utility of the WPS as below, and
enter the PIN code of the AP into the field after "Access Point PIN". Then click Connect.
The WPS Configuration Screen of Wireless Adapter
Figure 5-5 Add A New Device
TL-WR810N 300Mbps Wireless N Mini Router
- 106 -