Add/Edit Firewall Screen - ZyXEL Communications NXC2500 User Manual

Table 92 Configuration > Firewall (continued)
LABEL
Access
Log
Apply
Reset

16.2.1 Add/Edit Firewall Screen

In the Firewall screen, click the Edit or Add icon to display this screen.
Figure 105 Configuration > Firewall > Add/Edit
The following table describes the labels in this screen.
Table 93 Configuration > Firewall > Add/Edit
LABEL
Create new Object
Enable
From
To
Description
Schedule
Chapter 16 Firewall
DESCRIPTION
This field displays whether the firewall silently discards packets (deny), discards packets
and sends a TCP reset packet to the sender (reject) or permits the passage of packets
(allow).
This field shows you whether a log (and alert) is created when packets match this rule or
not.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Use to configure any new settings objects that you need to use in this screen.
Select this check box to activate the firewall rule.
For through-NXC rules, select the direction of travel of packets to which the rule applies.
any means all interfaces.
EnterpriseWLAN means packets destined for the NXC itself.
Enter a descriptive name of up to 60 printable ASCII characters for the firewall rule.
Spaces are allowed.
Select a schedule that defines when the rule applies. Otherwise, select none and the
rule is always effective.
NXC Series User's Guide
189