2914 Series Network Adapter Models; Sc Optical Fiber Connector; Lc Fiber Optic Adapter; Sfp Slot - Allied Telesis 2914 Series Installation And User Manual

2914 Series
Network Adapter
Models
SC Optical Fiber
Connector
LC Fiber Optic
Adapter

SFP Slot

The AT-2914 series includes the following models:
AT-2914SX/SC

AT-2914SX/LC

AT-2914SP

The AT-2914SX/SC network adapter is equipped with a 1000BASE-SX
port with the SC connector.
The SC connector is shown in Figure 2.
Figure 2. SC Optical Fiber Connector
To connect the SC optical fiber connector to a network cable, you must
have a fiber optic network cable with the SC connector.
The AT-2914SX/LC network adapter is equipped with a 1000BASE-SX
port with the LC connector.
The LC connector is shown in Figure 3.
Figure 3. LC Optical Fiber Connector
The AT-2914SP network adapter has an SFP slot that you can plug in an
SFP transceiver to connect the network adapter to a compatible link
partner. The link connected through the SFP slot operates at either
100Mbps or 1000Mbps (depending upon the speed of the installed SFP)
and only in full-duplex mode.
Note
An SFP transceiver must be purchased separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
Chapter 1: Introduction
15