Pre-Installation Checklist - Allied Telesis AT-2911SX/ST User Manual

Chapter 2: Installing the Hardware

Pre-Installation Checklist

32
Before installing the AT-2911 series adapter, check the following list:
1. Check that your computer has an appropriate open PCIe slot.
2. Verify that your computer is using the latest BIOS.
3. When you download the driver software from the Allied Telesis
website, record the path to where the driver file resides on your
system.
4. If your computer is active, shut it down.
5. When the system shutdown is complete, power off and unplug your
system.
6. Holding the adapter by the edges, remove it from its shipping package
and place it on an antistatic surface.
7. Check the adapter for visible signs of damage, particularly on the edge
connector.
Note
Do not attempt to install a damaged adapter. If the adapter is
damaged, report it to Allied Telesis. See "Contacting Allied Telesis"
on page 15.