Figure 14: Inserting The Network Adapter Card; Figure 15: Securing The Adapter Card - Allied Telesis AT-2911SX/ST User Manual

AT-2911 Series Gigabit Ethernet Network Adapters Installation and User's Guide
Figure 14. Inserting the Network Adapter Card
Caution
Do not use excessive force when seating the module, because this
may damage the system or the module. If the module resists
seating, remove it from the system, realign it, and try again.
7. Secure the network adapter card to the chassis with a Phillips-head
screw (not provided) as shown in Figure 15 on page 37.
Figure 15. Securing the Adapter Card
8. Replace the system's cover and secure it with the screws removed in
Step 2.
9. Power the system on.

E47
37