Sided Printing And 2-Sided Printing - Canon LBP7780CX User Manual

07YL-051

1-sided Printing and 2-sided Printing

You can select whether to print on one side or both sides of each sheet of paper.
The default setting for [Print Style] is [2-sided printing].
Paper Type
Plain paper
(60 to 105 g/m²)
Heavy paper
(100 to 163 g/m²)
*
The paper can be loaded only in landscape orientation (when the long edges of the paper are parallel to the front side
of the printer).
Before performing 2-sided printing, see
IMPORTANT
Precautions when performing 2-sided printing
Do not touch the paper during 2-sided printing until it is completely output. The paper is first partially output after the
front side is printed, and then it is fed again to be printed on the back side.
Printing on the back side of paper that was previously printed (performing 2-sided printing
manually)
The printer can manually print the back side * of paper that has been printed once.
When printing the back side of paper that has been printed once, first stretch out the edges and flatten out curls, load
them one sheet at a time in the multi-purpose tray, and then perform the following operation with the printer driver.
1. Display the [Paper Source] tab.
2. Set [Paper Source] to [Multi-purpose Tray].
3. Select the [Print on the Other Side] check box.
*
This is only for paper that has been printed using this printer. Also, you cannot print again on the same side of the
paper that was printed before.
*
If you are using A5 paper, the back side may not be printed correctly.
1.
Click [Finishing].
Paper Size
Standard size paper
*
A4, B5, A5 , Legal, Letter, Executive, Foolscap and 16K
Custom size paper:
Short edges 148.0 to 215.9 mm, long edges 210.0 to 355.6 mm
"Attention (1-sided Printing and 2-sided Printing)."