Printing On Labels - Canon LBP7780CX User Manual

07YL-045

Printing on Labels

Confirming usable labels
This printer can use the following sizes of labels.
Standard sizes
Custom paper sizes
* The paper can be loaded only in landscape orientation (when the long edges of the paper are parallel to the front side
of the printer).
Using the following types of labels may result in paper jams that are difficult to clear or may result in damage to the
printer.
Peeled labels or partly used labels
Coated labels that are easily peeled off from the backing sheet
Labels with uneven adhesive
Loading labels
You can load labels only in the multi-purpose tray.
"Loading Paper in the Multi-purpose Tray"
<Precautions when loading labels>
Fan the labels thoroughly, and then align the edges before loading them. If they are not fanned enough, multiple sheets
of paper may be fed at once, causing paper jams.
Take care not to mark or stain the printing surface of the labels with fingerprints, dust, or oil. This may result in poor
print quality.
Printing from an application
After loading labels, perform printing.
"Configuring the Printer Driver and Printing"
The print speed drops when printing on labels.
A4, B5, A5, A6 *, Legal, Letter, Executive, Statement *, Foolscap, 16K and Index Card
In case of portrait orientation (only when the UFR II printer driver is used): Short edges
127.0 to 215.9 mm; Long edges 127.0 to 215.9 mm
In case of landscape orientation: Short edges 76.2 to 215.9 mm; Long edges 127.0 to
355.6 mm