Check the printing
6
operation.
Check the ROM
7
installation.
Specify the settings
8
for the ROM module
as needed.
If you installed ROM afterward (If you are using the printer already)
Connect the cables
1
and cords.
Check the ROM
2
installation.
Specify the settings
3
for the ROM module
as needed.
Check the operations by Test Page in Windows.
"Basic Operations/Various Information for Windows"
"Checking the ROM Installation"
For details on the settings for the bar code fonts, see "Bar Code Printing
Guide" included in the User Manual CD-ROM.
Connect the removed cables and cords again.
"Checking the ROM Installation"
For details on the settings for the bar code fonts, see "Bar Code Printing
Guide" included in the User Manual CD-ROM.