Canon LBP7780CX User Manual page 586

[Mng. Settings]
[Off], [On]
[Settings Key Lock]
[Adjust Screen]
[Contrast] -3 Dark to 0 to +3 Light
[Backlight
[Off], [Level 1], [Level 2], [Level 3]
Brightness]
[Animated
[Off], [On]
Instruction]
[Show Toner
[Off], [On]
Gauge]
[Set. Comp. Notify] [Off], [1 second], [2 seconds], [3 seconds]
[Scrolling Speed] [Slow], [Normal], [Fast]
WSD (Web Service on Devices) protocol.
You can select the type of the printer driver
("UFR II", "UFR II XPS", "PCL5c", "PCL6",
"PS3", or "XPS (Direct)") to be installed on
the automatically detected printer in this
item.
When you set to [On], [
Settings) is locked and you cannot
operate the Setup menu.
When you set this item to [Off], [Settings
Key Lock] is not locked.
* You can unlock the locked Settings key
only from the Remote UI.
If the display is not clear, adjust the contrast or
brightness to the desired level.
Specifies whether the printer should display an
animated picture in the display when a paper
jam occurs or when a toner cartridge is
replaced.
Specifies whether the printer should display
the icon that indicates the toner remaining.
Specifies the display time of messages that are
displayed when the setting completes. If [Off]
is specified, no setting completion message is
displayed.
Set the scrolling speed for the message
display on the control panel.
] ( :