Canon LBP7780CX User Manual page 920

size of the PDF file), and then print again.
Solution 1
Optimizing the PDF file
Dividing the PDF file into multiple files
Send the file again using one of the following methods.
Insert the SD card into the slot and send the file again.
Solution 2 Send the file directly from the USB memory device.
"Installing SD Card"
"Printing Files Directly from USB Memory Devices (USB Direct Print) "
Cannot start printing because job is restricted. <Auto Error Skip>
<Cause> Print job restrictions are set.
Press [
Solution
can be printed. Store the data you want to print in a box.
"Setting Restrictions for Print Jobs"
Cannot store. <Auto Error Skip>
<Cause> [SD Card] in the Control Menu options in the Setup menu is set to [Off].
Perform the following procedure.
1. Cancel printing by pressing [
Solution
2. Set [SD Card] to [On] and print again.
<Cause 2> The number of the jobs exceeded the amount of jobs the printer can store.
The printer is ready to print by pressing [
Solution 1
Solution 2 Delete unnecessary stored jobs.
<Cause 3> There is not sufficient free space on the SD card.
The printer is ready to print by pressing [
Solution 1
Solution 2 Delete unnecessary stored jobs.
<Cause 4> The specified box number is not correct.
Solution Specify the correct box number.
Cannot verify. <Auto Error Skip>
<Cause 1> The department ID and password entered for your job did not match the department ID and
password registered on the machine.
Solution Print your job again by entering the correct department ID and password.
<Cause 2> Printing jobs with unknown IDs are disallowed.
] ( : Online) to cancel the job. If print job restrictions are set, only the data stored in a box
"[Setup] Menu ([Control Menu] Options)"
] ( : Online).
] ( : Online), ignoring the print data.
] ( : Online), ignoring the print data.