07YL-01F
Adjusting the Printing Position for All the Jobs
Perform [Offset Y] and [Offset X] using the control panel of the printer.
IMPORTANT
Confirm the adjustment result.
If any part of the print image lies outside the printable area after adjusting the printing position, the part will be missing in
the print result.
NOTE
Adjustable area
You can adjust the printing position between -50.0 and +50.0 mm for both the vertical direction and horizontal direction.
1
Press [
] (
: Settings).
2
Select [Layout] using [
3
Select a position you want to correct.
If specifying the setting for [Offset Y]
1. Select [Offset Y] using [
2. Specify the target numeric value using [
Each time you press [
] and [
], and then press [OK].
] and [
], and then press [OK].
] and [
], the setting value increases by 0.1 mm, and each time you press [
], and then press [OK].
], the setting value