Fill Patterns And Borders Are Not Printed In The Correct Color (Specified Color) Even When The Same Color Is Specified For Them - Canon LBP7780CX User Manual

07YL-0L9
Fill Patterns and Borders Are Not Printed in the Correct Color (Specified
Color) Even When the Same Color Is Specified for Them
Perform the following procedure.
<Cause> A special process may be applied depending on the line width of the border so that
thin lines are printed clearly.
Perform the following procedure in the printer driver.
Solution 1
You can specify the same setting from the printer's control panel.
"[Setup] Menu ([Quality] Options)"
Perform the following procedure in the printer driver.
Solution 2
You can specify the same setting from the printer's control panel.
"[Setup] Menu ([Quality] Options)"
1. Display the [Quality] tab.
2. Select the [Manual Color Settings] check box.
3. Click [Color Settings].
4. Display the [Matching] tab.
5. Set [Matching Method] for [Text] and [Graphics] to the same settings.
1. Display the [Quality] tab.
2. Select the [Manual Color Settings] check box.
3. Click [Color Settings].
4. Display the [Matching] tab.
5. Select [Gamma Adjustment] in [Matching Mode].
6. Change the gamma value for [Gamma].
The larger the value is, the darker in color the data is printed.