Canon LBP7780CX User Manual page 398

b. Set each password using [Auth. Password] from [User Settings 1] to [User Settings 5].
For details on the SSL encrypted communication function, see
8. Set [User Settings 2] to [User Settings 5] using the same procedure as needed.
If You Want to Change the Status (Valid/Invalid) of User Information
To enable registered user information, select the [Enable User] check box at the top of the targeted user information.
To disable registered user information, clear the [Enable User] check box at the top of the targeted user information.
(2) Proceed to Step 7.
Specifying Context Information to Be Used in the SNMP v. 3 Protocol
(1) Specify the context information to be used in the SNMP v. 3 protocol.
If You Want to Register Context Information
If You Want to Erase Context Information
If You Want to Register Context Information
1. Enter the context names used by the SNMPv3 protocol in [Context Name 1] to [Context Name 5] under
[Context Settings]. Up to 32 characters can be entered.
If You Want to Erase Context Information
"Setting Keys and Certificates."