Setup] Menu ([Imaging] Options) - Canon LBP7780CX User Manual

07YL-0U3

[Setup] Menu ([Imaging] Options)

NOTE
Table description
Bold values in the table indicate the default settings.
After changing the setting items with "*1", cycle the power of the printer or perform a hard reset to make the
settings effective.
The setting items or setting values with "*2" may not be displayed depending on the availability of the optional
accessories and other settings.
Setting Item
[Image Orientation]
[Zoom]
[Print Position]
*1*2
[Print Guarantee]
[Show Warnings]
[Print E-Mail Text]
[Limit E-Mail Print]
[Enlarge Print Area]
[RGB Source
Profile]
Setting Value
[Auto], [Vertical],
[Horizontal]
[Off], [Auto]
[Auto], [Center],
[Top Left]
[Off], [On]
[Off], [Print], [Panel]
[On], [Off]
*2
[Off], [On]
[Off], [On]
[sRGB v3.0
(Canon)], [Canon
HDTV gamma 1.5],
[Canon HDTV
gamma 1.8], [Canon
HDTV gamma 2.4]
[Euro Standard
Specifies whether the printer should print an image in portrait (vertical)
orientation or in landscape (horizontal) orientation.
Specifies whether the printer should print with scaling outputs
according to the printable area.
Specifies the printing position for an image.
Set the processing method for received TIFF data.
When it is set to [Off], the processing time is shortened by
processing received TIFF data sequentially.
When it is set to [On], it is possible to prevent errors from
occurring, since all the TIFF data is received before processing
begins. However, the printing speed will drop.
After specifying, perform a hard reset or restart the printer to
enable the settings.
Specifies the display setting for the error message in case of an error
occurring.
Set e-mail print.
"Receiving E-mail Data on the Mail Server and Printing (E-mail
Print)"
Specifies whether the printer should print a document with its printable
area expanded.
When [On] is specified, part of the print image may be missing
near the margins of the paper.
Select a suitable profile for RGB data that matches the monitor that
you are using.
When it set to [sRGB v3.0 (Canon)], it is set to the industry
standard image quality for general Windows (PC) monitors. When
using monitors that support sRGB, it can match the colors
displayed on the monitor and the colors printed in the printer and
print colors close to the colors displayed on the monitor.
When it is set to [Canon HDTV gamma X.X], it adjusts the
brightness of the printed result so that the brightest and darkest
parts of the data are not lost. Set it to adjust the brightness, such
as when the print result is brighter than the colors displayed on
the monitor. The larger the gamma value, the darker it is printed.
You can set a simulation target when printing CMYK data. The
machine converts CMYK data to a device-dependent CMYK color
model in accordance with the simulation target selected by the CMYK
Setting