Table of Contents
Advertisement
5. If [Authentication Yes/Encryption Yes] or [Authentication Yes/Encryption No] is set for [Security Settings],
select [MD5] or [SHA1] for [Authentication Algorithm] as the authentication algorithm used by SNMPv3.
6. When [Authentication Yes/Encryption Yes] is set using [Security Settings], set an authentication
password.
[Authentication
Enter the password to be used for the authentication function of the authentication
Password]:
algorithm. 6 to 16 alphanumeric characters can be entered.
[Confirm]:
To confirm the password, enter the entered [Authentication Password] again.
- Quick Links:
- Control Panel
Hide quick links:
Advertisement
Table of Contents
