Errors Relating To The [Enhanced System Application Management] - Canon LBP7780CX User Manual

07YL-0J4
Errors Relating to the [Enhanced System Application Management] Page
<Cannot start this application because there is no
distributable software in the application. Get a distributable
software.>
<Cannot start this application because the number of
bootable applets has exceeded the limit. Start this application
after stopping other
<Cannot start this application because system resources
(memory, threads, sockets, file descriptors, disk space, or
screen size) required to start the application may not be
available. <Resources>>
<The name listed in the file for the application and the applet
name to register with Applet Viewer Service are different.
Check the file.>
<The following login services cannot be uninstalled:
The currently set login service
Login services that will be enabled after the device is
restarted
Default Authentication login services
The currently set login service can be uninstalled after the
device is restarted.>
<The file for the application to install does not exist or the file
path is incorrect. Try to specify the path
<The manifest is not listed in the specified file. Check the
file.>
<The file for the license to install does not exist or the file
path is incorrect. Try to specify the path
<The contents of the file for the application to install are
incorrect or information is missing. Check the
<The contents of the file for the license to install are incorrect
or information is missing. Check the
<Cannot install this application because a code signing has
not been confirmed to be valid. Get a valid code
<Cannot install this license because the specified application
and license do not correspond. Try to specify a path for the
license file again.>
<The specified file is not system application. Check the
<Cannot install this license because the number of license
file ID logs that can be saved has exceeded the limit. Contact
your service representative.>
<Cannot install because a used license file is specified. Try
to specify the file
Cannot start this application because there is no distributable software in the application. Get a
distributable software.
Problem The application cannot be started because it does not contain any redistributable modules.
Action Contact the application developer.
Cannot start this application because the number of bootable applets has exceeded the limit. Start
this application after stopping other applications.
The application that you are attempting to launch contains applets. If the application was launched, the
Problem number of applets that would be booted on the system would exceed the limit (five applets), so the
application cannot be launched.
applications.>
again.>
again.>
file.>
again.>
<To install the specified application, a license file
must be installed at the same time. Specify a
license
<The following information in the specified
application is incorrect. Check the file. <Inaccurate
information>>
<The following information is missing in file for the
specified application. Check the file. <Missing
information>>
<The specified application does not support this
device.>
<The specified license does not match this
device. Specify an installable
<Cannot install this application because an applet
included in the specified application has exceeded
the area that can be displayed in the device
panel.>
<The specified file is an update file. Stop the
application that you want update and then install
the
<The specified file is an update file for a login
service that is currently set. Switch to another
login service, restart the device, and then install
the
<Cannot install this application because storage
space has been exceeded. Uninstall other
file.>
applications and then try to install it
<Could not cancel installation. Installation has
been successfully
<The process is canceled because the system
signing.>
has been shut down. Restart the system, and then
perform the process
<Cannot install the application or license because
another application is being installed, or the
file.>
firmware being updated. Please wait a moment
and then try
<Error: <Error
file.>
file.>
file.>
completed.>
again.>
again.>
Details>>
license.>
again.>