Saving A Document In The Sd Card In The Printer (Stored Job Print) - Canon LBP7780CX User Manual

07YL-075

Saving a Document in the SD Card in the Printer (Stored Job Print)

You can save print jobs in the SD card (box) in the printer by selecting [Store] from the printer driver for this printer.
In addition, stored jobs can perform the following operations from the printer's control panel and the Remote UI.
Performing a Stored Job Print Using the Control Panel of the Printer
You can print data by selecting the saved box or job.
Displaying or Operating the Jobs Stored in a Box (Resume/Delete)
You can check or operate the jobs stored in a box. You can perform operations of Resume (Print) and Delete. You
can also check the jobs in detail. This operation is performed from the Remote UI.
Changing the Box Settings
You can change the name of the box in which data is saved or password. This operation is performed from the
Remote UI.
NOTE
About stored jobs
The stored jobs can be displayed or operated only when the SD card is installed, and [SD Card] is set to [On]. For
details on the settings for [SD Card], see
The saved jobs are saved on the SD card even after printing, and they are not deleted even after turning the printer
OFF. When you want to delete the saved jobs, use the Remote UI.
Up to the total of 1000 jobs in all the boxes can be saved.
You can change the name of the stored job in the printer driver before printing.
Stored jobs can be deleted automatically by setting a length of time to pass between storing of the jobs and their
deletion. On how to set the length of this time, see
Since processing for deleting stored jobs is performed in background, the screen display does not always show the
actual state depending on your system environment. For example, even if "0" is displayed as number of jobs stored
in a box, you may not be able to store new jobs in the same box. In this case, wait for some time and then try again
the job storing operation.
When the amount of data or number of jobs that you can save on the SD card exceeds the limit
The message <Cannot store.> is displayed. When the message is displayed, perform the following procedure.
(1) Press [
(2) Delete any unnecessary jobs from among the jobs saved on the SD card.
(3) Save the jobs again.
Operating the Remote UI
"Remote UI"
"[Setup] Menu ([Control Menu]
] ( : Online) to skip the error. (The job for which the error was skipped will be deleted.)
Options)."
"Automatically Deleting Files Stored in a Box."