Functions Which Can Be Specified From The Control Panel - Canon LBP7780CX User Manual

07YL-067

Functions Which Can Be Specified from the Control Panel

This printer allows you to specify the printing functions from the printer driver. However, some printing functions are
specified from the control panel or the Remote UI. The following table shows the functions to be specified from the control
panel or the Remote UI.
For details on the items you can manage using the control panel, see
Function
Multi-purpose tray
paper size
Multi-purpose tray
priority
Drawer N (N = 1, 2)
size
Standard paper size
Invalid paper tray
Auto selection
Default paper type
Adjust start position
(Offset X, Offset Y)
Alternative method
Toner volume
correction
Reduce quality
Recovery printing
Check paper size
Specifies the size of the paper loaded in the multi-purpose tray.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Specifies whether the printer should detect the paper source in order starting with the multi-
purpose tray.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Specifies the size of the paper loaded in the paper drawer (Drawer 1 or 2).
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Since paper size cannot be specified when printing from DOS, UNIX or other operating system,
specify it using this setting.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Specifies what the printer does when paper that is the same size as the paper size of the
received data is not loaded in the selected paper source.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Specifies the paper source to be automatically selected.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Since paper type cannot be specified when printing from DOS, UNIX or other operating system,
specify it using this setting.
"[Setup] Menu ([Paper Source] Options)"
"[Select Feeder] Menu"
Adjusts the printing position in the vertical direction (Y) or the horizontal direction (X).
"[Setup] Menu ([Layout] Options)"
"[Setup] Menu ([User Maintenance] Options)"
If the last page for the 2-sided printing is 1-sided printing, 1-sided printing is applied to the last
page.
"[Setup] Menu ([Layout] Options)"
Set the correction method for when the toner volume has exceeded the printer's limit value
when printing high density parts.
"[Setup] Menu ([Quality] Options)"
Specifies whether the printer should continue printing with the image quality of the data being
lowered automatically or stop printing displaying an error message when the memory required
for the process runs out.
"[Setup] Menu ([Quality] Options)"
Specifies whether to print the partially printed page when the printer stops printing due to a
paper jam or an error occurring.
"[Setup] Menu ([User Maintenance] Options)"
Specifies whether the printer should stop printing, displaying the message <Check paper size.>
or continue printing.
"[Setup] Menu ([User Maintenance] Options)"
"Setting Items."
Overview of the Function