Specify the settings
8
for the ROM module
as needed.
If you installed SD card afterward (If you are using the printer already)
Connect the cables
1
and cords.
Checking the ROM
Installation.
(Only when installing
2
ROM)
Checking the SD
Card Installation.
Specify the settings
3
for the ROM module
as needed.
For details on the settings for the bar code fonts, see "Bar Code Printing
Guide" included in the User Manual CD-ROM.
Connect the removed cables and cords again.
"Checking the ROM Installation"
"Checking the SD Card Installation"
For details on the settings for the bar code fonts, see "Bar Code Printing
Guide" included in the User Manual CD-ROM.