Three-Sided Borderless Printing On Roll Paper - Canon TX-3100 Online Manual

Three-sided Borderless Printing on Roll Paper

In normal borderless printing, paper sizes that match the width of the roll paper are combined to print without
borders on all four sides.
If you use the three-sided borderless printing feature, you can combine paper sizes that don't match the
roll paper width, and print with no borders on three sides. However, if you perform three-sided borderless
printing, you need to cut the right side of the paper after printing.
Three-sided Borderless Printing to Match Paper Size
The procedure for three-sided borderless printing by enlarging or reducing documents to match paper size
is described below.
1. 1. Open the printer driver setup window
2. Select the paper source 2.
From the Paper Source list on the Page Setup tab, choose the best option for your purposes
between Roll Paper (Auto), Roll 1 and Roll 2.
Important
• The paper feed method will differ depending on the lower level (roll paper 2) settings or roll unit
option settings.
3. Select paper roll width 3.
For paper roll width, enter the same value set in the printer under Roll Paper Width.
4. 4. Select borderless printing
In the Page Setup tab, place a checkmark next to the Borderless Printing option.
636