Installing The Switch; Installing The Aileron Servos - Seagull Models EXTRA 260 Instruction Manual

EXTRA 260.
Rudder servo.

INSTALLING THE SWITCH.

Install the switch into the precut hole in the
side, in the fuselage.
Remove covering.
8
Throttle servo.
Instruction Manual.
Switch.

INSTALLING THE AILERON SERVOS.

Servos.
We recommended to use long servos arm
( 70mm diameter) for all servos without throttle
servo.
Install the rubber grommets and brass
collets onto the aileron servo. Test fit the
servo into the aileron servo mount.
Because the size of servos differ, you
may need to adjust the size of the precut open-
ing in the mount. The notch in the sides of
the mount allow the servo lead to pass through.
Using a small weight (
) and thread, feed the string through
works well
the wing as indicated.
Thread.
Thread.
Small weight.
Thread.
Weighted fuel pick-up
Small weight.
Wing bottom.
Small weight.