Rudder Control Horn Installation; Aileron Pushrod Installation - Seagull Models EXTRA 260 Instruction Manual

Repeat the procedure for orther
elevator.
RUDDER CONTROL HORN
INSTALLATION.
! 1) Position the rudder control horn on the
left - right side of the rudder.
! 2) Locate the two nylon control horns, two
nylon control horn backplates and three
machine screws.
3x30mm.
Rudder
control horn.
! 3) Position the rudder horn on the both
side of rudder. The clevis attach- ment holes
should be positioned over the hinge line.
! 4) Using a 1.5mm drill bit and the control
horns as a guide, drill the mounting holes
through the rudder halves.
!
Mount the control horns by inserting the
5)
bolts through the control horn bases and
elevator halves, then into the mounting
backplates. Do not overtighten the nuts or the
backplates may crush the wood.
Rudder
control horn.
www.seagullmodels.com
2x30mm.

AILERON PUSHROD INSTALLATION.

Aileron pushrods assembly follow pictures
below.
Pushrod.
55mm.
C/A glue.
M3 lock nut.
13