TouchDisplay - FUTABA T16IZ Manual

Touch Display
Tap the panel with your finger to navigate.
*Plastic film is attached to the Touch Display. Please
be careful so that you don't scratch the Touch
Display with anything hard such as a metal object.
Don't push the Touch Display with excessive force
or drop anything on the panel.
*Although you may find some air bubbles under the
plastic panel due to environmental changes such
as temperature, it is not a defect and will cause no
problems.
*Color LCD is made from many pixels. Some
pixels hold lighting. Moreover, some pixels go out.
And a screen may flicker. Such condition is the
characteristics of color LCD. It is not failure.
HOME/EXIT and U.MENU/MON.
HOME/EXIT
Return to the
Press
previous screen
Return to the
Press and hold
home screen
Press from To Telemetry
HOME screen. display
Press and hold
Panel lock / Lock
from HOME
release
screen.
Tapping the settings buttons for
each value on the settings screen
will cause value input buttons to
appear at the top of the panel.
Pressing and holding a value will
return it to its default setting.
Value input buttons display at the
top of the display.
Large change Small change
in value in value
19
→ GO to TABLE OF CONTENTS
Large change
in value
U.MENU/MON.
To user menu
Press
display
Press and To servo monitor
hold display